Commercial Fire Alarm Servicing & Commissioning
Irish Standard Fire Alarm Commissioning, Servicing & Certification
Certified commercial fire alarm commissioning, quarterly maintenance inspections, and complete statutory certification across Dublin & Leinster. Fully compliant with I.S. 3218:2024 & Building Regulations Part B.
Commissioning & PPM
Irish Statutory Code
Official Servicing Certs
Addressable & Conventional
Irish Statutory Regulations & Fire Safety Compliance
Under Irish law, commercial property owners, employers, and facility managers are legally obligated to maintain active, fully certified fire detection systems.
I.S. 3218:2024 Standard
The national Irish Code of Practice governing commercial fire detection and alarm systems: design, installation, commissioning, quarterly servicing, and annual verification.
Building Regulations (Part B)
Mandates adequate early fire detection, audible sounder coverage, and cause-and-effect control to ensure rapid evacuation and structural compartment protection.
Safety at Work Act 2005
Places an absolute duty of care on employers and duty holders to maintain life-safety fire systems in working order, with every inspection recorded in a statutory on-site logbook.
Fire Services Acts 1981 & 2003
Empowers Local Authority Fire Officers to inspect premises, inspect maintenance logbooks, and issue statutory Fire Safety Notices or Closure Orders for non-compliance.
⚠️ Risks of Non-Compliance
Failure to possess valid I.S. 3218 certificates or maintain an up-to-date fire alarm logbook can result in formal enforcement notices from Dublin Fire Brigade, substantial fines, and may completely invalidate commercial building insurance policies in the event of fire or smoke damage.
Where Fire Detection Is Statutorily Required
I.S. 3218:2024 defines system categories (L1, L2, L3, M) requiring comprehensive fire detection and alarm coverage across commercial premises:
Smoke detection along all designated corridors, protected stair cores, and manual call points at every final exit.
High-risk service rooms, boiler plants, server rooms, and main electrical distribution boards.
Optically balanced smoke detection providing unhindered coverage across open workspaces, trading floors, and common areas.
Dedicated rate-of-rise heat detectors designed to trigger under rapid heat rises while eliminating false cooking alarms.
Concealed space detection in commercial ceilings and raised data floors to prevent hidden fire spread.
Audible alarms achieving minimum 65 dBA throughout workspaces (75 dBA at bedheads) and VAD flashing beacons in noisy areas.
Our Commissioning & Servicing Process
Methodical technical verification and life-safety compliance management by registered engineers.
Detector & Loop Audit
Testing optical smoke, heat, and multi-sensor heads with calibrated aerosol test kits, verifying device addressing, and clearing loop fault codes.
Standby Battery Load Testing
Conducting internal resistance and load discharge tests on panel standby batteries to confirm mandatory 24-hour or 72-hour standby operation during mains power cuts.
Interface & Sounder Verification
Actuating manual call points, verifying minimum 65 dBA sounder levels, and checking relays: magnetic fire door releases, gas shut-off valves, and BMS links.
Logbook & Certification
Updating on-site statutory fire logbooks and issuing official I.S. 3218:2024 compliance and commissioning certificates on the same day.
Statutory Inspection & Servicing Schedule
Irish standard I.S. 3218 mandates scheduled quarterly maintenance visits to maintain legal compliance.
Quarterly Periodic Inspection & Test
Under I.S. 3218:2024, commercial fire alarm systems must be inspected four times per year. Each quarterly visit tests at least 25% of all detectors and call points, ensuring 100% of devices are physically tested every 12 months. Our scheduled contracts ensure your building never falls out of compliance.
System Commissioning & Handover
Independent third-party inspection, circuit testing, cause-and-effect programming verification, and official sign-off for electrical contractors, fit-out builders, and landlords. Complete with official I.S. 3218 Commissioning Certificates ready for local building control and fire officers.
Compliance Certificates & Reports Provided
Official documentation required by Fire Officers, Insurance Underwriters, and Health & Safety Auditors.
Quarterly / Annually
Certificate of Servicing
Official I.S. 3218:2024 servicing certificate confirming scheduled device testing, standby power verification, and system operational integrity.
On Completion
Commissioning Certificate
Statutory sign-off certificate issued after commissioning new installations, panel replacements, or fit-out modifications.
Every Visit
Inspection & Defect Report
Comprehensive itemized schedule listing tested devices, standby battery health, sounder decibel levels, and identified remedial repairs.
Commercial Sectors We Serve
Providing statutory fire safety compliance solutions across Dublin and Leinster.
Book Fire Alarm Commissioning or Servicing
Fill out the details below for a fast response and competitive quote from our engineering team.